Replacing the Subaru Forester self levelling suspension can result in the rear end of the car sitting too low. This is because the original Forester rear spring is too weak to support the vehicle without the aid of the self levelling shock absorber. These Forester self levelling replacement kits are designed to be a direct fit replacement for the Subaru Forester self levelling shock absorbers. This is achieved by installing a conventional style rear shock and spring designed for this application using a matched set of dampers and springs specifically for this purpose. The car will be at normal ride height when unladen. You will lose the self levelling function of the original Subaru Forester Self Levelling equipment but the heavier duty spring will compensate on all but heavily laden cars. On SF models an even heavier duty spring can be supplied for Subaru Forester cars that are regularly run fully laden.

• Used to replace the Subaru Forester OE self levelling shock absorbers
• SF fits all SF Subaru Foresters including the Turbo models.
• SG fits all SG Subaru Foresters including the Turbo models.
• SH fits all SH Subaru Foresters including the Turbo models.
• Direct bolt in replacement for the Subaru Forester OE self levelling shock absorbers.
• NO modifications to the vehicle are required
• No extra parts are required although original top mounts are reused
• SG rear come pre assembled with top mounts so spring compressors not required
• Original ride height. 650mm-660mm depending on model. Up to 685mm with extra load/height springs
• SF models available with extra load spring
• SF Subaru Forester models Full lowering kit available