Replacing the Subaru SG Forester self levelling suspension can result in the rear end of the car sitting too low. This is because the original spring is too weak to support the vehicle without the aid of the self levelling shock absorber. These kits are designed to be a direct fit replacement for the Subaru Forester self levelling shock absorbers. This is achieved by installing a conventional style rear shock and spring designed for this application using a matched set of dampers and springs specifically for this purpose. The car will be at normal ride height when unladen. You will lose the self levelling function of the original equipment but the heavier duty spring will compensate on all but heavily laden cars. On SF models an even heavier duty spring can be supplied for cars that are regularly run fully laden.

• Used to replace the Subaru Forester OE self levelling shock absorbers
• SG fits all SG Subaru Foresters including the Turbo models.
• Direct bolt in replacement.
• NO modifications to the vehicle are required
• No extra parts are required although original top mounts are reused
• SG rear come pre assembled with top mounts and springs so spring compressors not required
• Original ride height. 650mm-660mm depending on model.